Comment with vaporesso tank gen 220w swag target pm80 gtx renova zero luxe

Vapeciga vaporesso gen 220w received the purposes of this review:

Color Xros Vaporesso:

– blue
– Matt Gray
– Silver
– Blue sky
– Pink roses
– Rainbow


– Size: 112mm x 13mm x 23mm
– capacity of the cartridge: 2 ml
– Battery capacity: 800 mAh
– Output: 11W / 16W
– Cartridges: 1.2ohm networks sheath / sheath networks 0.8ohm
– Load Type C 1A
– adjustable air flow

In the frame:

– Battery VAPORESSO Xros
– 0.8Ω Xros VAPORESSO POD (2 ml)
– 1.2Ω Xros VAPORESSO POD (2 ml)
– Type C USB Cable
– User’s Guide
– Warranty card
– Reminder Card

Vapeciga swag kits available in 6 different colors. You will receive these devices in a pretty package with two cartridges in the well. build quality of the device is good, everything is as it should be. In the device, you can see “Vaporesso”. This device is low, the dimensions of the device 112 mm x 13 mm x 23 mm.

From below you can see the holes in the magnet cartridge and air. Therefore, the cartridge remains in place because the magnet and the magnet is good, the cartridge in its always nice place. cartridge capacity is the capacity of 2 ml nothing for the armor system. You will receive the coil unit with networks in which it is installed and receives a packet network 1.2ohm cartridge.

From the top of the camera you can see the slot inside the cartridge and you can see the magnet that holds the cartridge in place, you can also see the connections and ports airflow. On one side of the device you can see the shutter button, not very clicky but it works very well. Therefore, this device has a shutter button you can press to vaporizer and also has an attractive switch circuit is very nice because you can use both. shooter is activated, it works very well and is very sensitive. Here you can see the light of the shutter button and battery indicator LED lights in three colors:

– Green: 70% to 100%
– Blue: 30% -70%
– Red: 0-30%

On the other side of the camera you can see the air flow control, so here you can adjust the airflow is very good. Here you can scroll left and right buttons to adjust the airflow. In my opinion, the system airflow of the device is very good and I really believe we can adjust the airflow here.

The target pm80 pod show new feels very comfortable in hand. As expected, it is much lighter than twice mods I-18650. With the dimensions of 112 x 23 x 13 mm in all Epileptic pockets which makes it a perfect vaporizer be out.

It seems to be more durable finish. I dropped Xros on the porch of the earth, just because it is very soft and I forgot that I was resting in my lap when I am. But I could not find a scratch after the accident.

One good thing is clear sheath with a good view of the liquid level. Interestingly, in my quick research, it is not a standard pod have fried. But for me it is very important, I should be able to check the level of the liquid is easy, even in low light.

the battery should be enough to last a working day, provided that no Vaper is linked. 0.8 Ohm Pod generally VAPE pods 3, corresponding to 6 ml of liquid-e. Battery indicator 4 pod began to change from blue to red, which is when I put it on the charger. If the battery is completely depleted, it should be possible vaporizer 8 ml of juice before recharging. And with a 1.2 Ohm coil, battery life is obtained.
loads very fast. I do not do the right steps, but it took me less than an hour to fully recharge.
By the way … I like the USB-C port, which oddly enough is not standard.

You can adjust a bit tight for MTL opened completely, as desired. Depending on the definition of DL, which can also perform vaporesso gtx click in limit DL when set open.

The first is that I have to pull a little harder than I’m used when a tie is taken. When not pull enough, the automatic drawing does not work well and the reel began to chirp. But you can avoid this by adjusting their drawing techniques.

On the other hand, at least in my hand, there is a certain amount of accumulation of condensation on the inside of the funnel / chimney of a boat that ended in the mouth. Not bad, but maybe you can make either version 2 or higher.

Another point (very low) is the position of the cursor control air flow. As some reviewers have mentioned, you can easily cover the air inlet with your finger. But after a while you get used to the position with the index finger does not interfere with air circulation. And for me consider using the keyboard. With the activation of the draw, which tend to have more Xros basically eliminate the problem altogether.

My spirit:

Vaporesso Xros is a small shield system and the device is easy to use. You can buy these devices in 6 different colors are good. Good package, receive two cartridges inside. build quality of the device is good, everything is as it should be if you ask me. The cartridges are held in place very well, it is a good transparent as seen in eLiquid. 2 ml capacity cartridge is a good capacity for the small gondola system.

On one side of the device you can see the shot button can be used to renova zero vape get code and we have an interesting switch is activated, which is fine. This device has a built-in battery, this battery has a capacity of 800 mAh capacity for both small pod. Moreover, we have here the USB Type C ports for charging the battery.

I personally prefer the 1.2ohm coil because it is better for MTL airflow and tight in my opinion. In the air flow near the 0.8ohm coil expect a hot vaporizer. Xros in my opinion is one of the very good systems sheath is, has everything you need and if you want to buy a pod system, must be taken into account.


– Actually no complaints about this pod system, which is a device that is very good, but if I had to choose anything, I can say it would be good to have a coil replaced, not really with


– Good build quality
– funnel comfort
– easy to fill
– transparent Cartridge
– Two cartridges in the package
– pleasant stay cartridge into place
– adjustable air flow
– The good taste
– shutter button and the switch is activated to draw
– 800mAh
– The battery indicator
– c Usb

The following is very demanding: I have an LED indicator located above the activation button, not below. Because when the device on or off, LED blankets my mother is closed so you can not see. But honestly, it’s not really necessary.

And for those who prefer the shutter button is activated, the Vapeciga vaporesso luxe 220w copy tangible deactivation given the opportunity to continue with the drawing of a second or after the release button to prevent the accumulation of condensation in the funnel.

I like Vaporesso Xros, and now my head off vaporizer. I find it satisfying and tasty vapor, large battery and a small device, of course, it was small. What makes it stand out from the crowd is airflow to the rear slider. I have not been in much of the size of the pod kit that offers something similar.

I can not recommend Xros for those who want a small pod system for using MTL. This is a great small vaporizer.

You can buy here:vaporesso tank sourcemore thanks

Review about vaporesso tank gen 220w swag kits pm80 gtx  renova luxe

A vapeciga vaporesso gen 220w mod kit adjustable coil storage tank for its GTX coil favorite. Delve But let us review GTX One more.

These products were shipped to Vapresso generosity so to stand the test side. other thoughts you find below are my own and are not affected by the fact that this talent.

Please note that this article may contain affiliate links, which helped fund the spray site Make ‘N’.

No doubt GTX coil popular because it tastes. But until now, the coil has been limited to Vaporesso duct system. In addition, with the traditional style of the tank is Vaporesso GTX answer to everyone’s dreams? 40W mod or have adapted to the internal battery of 2000 mAh, stopped a little short of the mark? Discover and learn in this review Vaporesso GTX One.

The contents of the box
Here is a brief summary of what you can expect to see with the kit included Vaporesso GTX.

Vaporesso filling GTX One
1x Vaporesso GTX A Mod
1x Vaporesso bubble GTX deposits 18, 3 ml (TPD 2 ml)
1x GTX mesh coil 0.8Ω
1x GTX mesh coil 1.2Ω
the glass tube rectilinear 1x
Bag 1x O-ring section
1x USB cable C
1x user manual

Vapeciga swag kits typical packaging style, color and packaging reflects the options selected image color GTX Vaporesso One. In addition to the laminated image GTX is needed before most of the space. While the side showing the key elements of a Vaporesso GTX as icons. Also on the back are the specifications, content, logos compliance warnings from the government and authenticity checker.

Removing the cover reveals Vaporesso GTX tanks A and 0.8Ω mesh coil pre-installed, seated in a plastic inlay. While resting on the side is a glass tube to the right and substituting 2 ml O-ring. Also under the inlay it is a USB-C coil wire mesh GTX 1.2Ω and manual.

manufacturing quality

Undoubtedly Vaporesso GTX One is thin and mostly looking smart kit. In addition, curved lines and chrome mods attractive contrasts well against honeycomb footprint was blue, which includes most mod. In addition, the pad portion Mod hidden nature of the metal, flavor and grippy neoprene.

Although a GTX equipped with a tank weighs only 118.6g, mod feeling is still strong, but not as robust as the finish line PM80. However GTX still feels like a happy’ll take home device. Although time will tell how the chrome finish has a capacity for everyday use and abuse.

Of course, like chrome front cover it is formed as part of a larger, who joined the line is impressive dish. The following button can turn your answers without feeling too plasticky. But C-USB port on the front of the mod is a bit uncomfortable, but more on that later.

Although the LCD screen is easy to read, it is safe, or worse. In addition to providing fonts and icons they are not as well equipped as the goal PM80. This has led to the emergence and GTX Vaporesso looking a little dated. Also houses the internal LCD or oblique, and although only a few are still visible.

510 connector

While plates 14 mm 510 whose happy tanks Vaporesso 22mm target storage. The thread is important to carefully and sweet pin 510 has a relatively rigid center. This gives some confidence in the long-term use. In addition, the center pin seemed to cast about 2-3 mm, which is good to see.

A GTX tank 18

Visual target pm80 pod show new GTX tank 18 similar mod. In addition, the tank after the first inspection is left clean and odor of the manufacturing process. However, if cleaning is recommended in depth.

The important thing is to put at the top and bottom cover GTX A tank 18 is cut correctly and working properly. In addition to good coil housing land and unlimited cutting burrs expected.


Similarly, out of the tank and ends well when there is little knurled However, it was also cut. Despite the absence of control ring facilitate air flow with the lines of a decent easy to use. Be airflow hole is cut clean inlet 5 be either fully open or fully closed.

Dimensions 127.5 GTX Vaporesso tank equipped mod means higher than the basic model at upper end drops. In addition GTX A mod is 22.7mm wide and 29.3mm deep from front to back.

Vaporesso GTX One is at 5 measurement, click on the shutter button. In addition to pressing the shutter button three times quickly to lock GTX One. Preventing accidental setting changes. To unlock repeat the process.

In addition, holding both up and down at the same time to open the settings menu. This allows the user to change the mode of the vaporizer GTX One. But unlike the latest version of Vaporesso, instead of fighting for breath. Oh dear! LOL.


As we have faster access to the different modes that are taking place and the same time. Once in the settings menu, you have access to a variety of modes available in Vaporesso GTX vaporizer One. Goals are important because of PM80 Vaporesso SE, there are no restrictions on how such watts output power.

Smart VW – Intelligent Variable watt
No doubt VW seems smart to produce a vaporizer little warmer, regardless of the setting. On the other hand, I think it raises a vaporizer in early watts, watt is then reduced slightly. However, it is very subtle and difficult to say for sure.

Variable watt – VW

Set default when the vaporesso gtx get code mode allows the user to select the desired output power of 0.1 watts gradually turns. It allows the refinement of the vaporizer experience.

VV – variable voltage
As VW same methodology, while the watt is used to control the output. Instead voltage is used as an output of the driving process.

In selecting a menu option in the factory default setting GTX A restored, if any.

Battery use

While the GTX Vaporesso internal battery is 2000 mAh, the economic good of the battery with the bobbin. Moreover, with the indoor coil it requires less energy than the others in the line GTX, the battery life on a typical day. But, as always, it depends on personal use. But with GTX More MTL led vaping, MTL most users will be satisfied with their performance.

Although it determined by the level of charge through the USB connector 5V 2A-C. But I get Vaporesso GTX A 5.08V 1.53A with the cost, which was a bit disappointing. In addition, the USB-C placement in front of a large device back toward the cable. Furthermore, this makes the remote device or the other side or on the side during loading. Therefore, you can display the current charge status a little uncomfortable. But it is not a determining factor.

However, GTX An interesting feature is the approximate charging time is displayed next animated icons and battery level. In addition, if necessary GTX One stop charging if a spray is needed fast and continue again after the shutter button is released.

Fill in
Vaporesso tanking GTX A 18
Although the cap filling method remove the top and all very easy on Vaporesso GTX One. But it can be a little uncomfortable and want to look good style rear bayonet or by pressing the top cover. Especially when unscrewing the cap, the reservoir can start unscrewing. Therefore, the tank must be tightened. This can cause the tank bolted to the mod, and it is difficult to remove. But one of the benefits of removing the top cover is that each bottle size E-liquid can be used.


A reservoir 18 renova zero vape click in airflow

Undoubtedly, the design of the GTX Vaporesso A tank airflow is designed to produce both interesting and somewhat limited MTL DTL spray. In addition to smooth ring control air flow is fully customizable. Because the air inlet 5 is open or fully closed draw much stricter. In addition to defining the airflow remains pleasantly smooth vaporization.

Replacement spool
Vaporesso GTX A replacement tank coil 18
Although the use of a traditional tank GTX Vaporesso dam easy to change the coil in one dose of Vaporesso system. In addition to changing the coil remains the method of “Plug N Play” to enter. However, it still can not change the coil with a large number of e-liquid is left. However, with the old reel, the new first coil put some e-liquid in the coil, and removing a lock down each hole. Now the new coil appear to cart and fill if necessary. In addition to leaving the coil support device for a while to ensure that adequate saturated. I prefer to let the whole 10-15 minutes, then the vaporizer.

GTX mesh coil 0.8Ω 12W-20W

axis mesh well for GTX 0.8Ω 70VG Undeniably, but we chose not chained vaped. On the other coil, they prefer some air. Plus approximately 3 1/2 hole in the air flow control is very suitable for this coil, regardless of the content PG e-liquid. In addition, when vaped to 18.5W and lemon meringue 70VG e-liquid flavor profile does a reasonable job. But it’s not crazy. But the fishing flavored salt when Nic vaped 20 mg e-liquid flavor much better.

GTX mesh 1.2Ω coil 11W 7W-
Vaporesso GTX mesh coil 7 1.2 – 11W
While the GTX 1.2Ω mesh coil may take some time to break. But when it happens, the production of 50 pg e-liquid flavor and much softer than the unmelted replacement spray. In addition, press the groove 20 mg salt Nic pleasantly well without violence.

Chipset and Protection
Supported by the chipset is not specified, the GTX Vaporesso A offers the following protection mod levels.

10s overtime protection – protection against accidental shootings continued.
Protecting low resistance – Avoid growth when breaking coil or together.
high resistance to protection – Protection against fire when the coil resistance is too high.
No load protection – is triggered when a tank if it is installed.
short-circuit protection – a form of protection against surges.
low voltage protection – Preventing battery level is reduced to a point of no return.
discharge protection – similar low voltage, but shows low power.
protection of goods – Protect your device and a battery of dangerous overload.
USB Input Protection – prevents damage to the high voltage stop the charging process.
Kit GTX Vaporesso
29.3mm dimensions (D) x 22.7mm (W) x 127.5 (H) mm (dropwise including Tip)
output power range from 5 W – 40 W
0.15 Resistance Range – 5Ω
battery type and quantity of 2000 mAh internal battery.
Intelligent mode is available watts, voltage, watts.
Materials – An illegal GTX Mod
Materials – Stainless steel tank 18 GTX, Pyrex ??

More often than VAPE device having a paste or two. Especially in the case of the GTX model One there are some small problems with the screen. First LCD if you tilt and tortuous. Both use a particular screen is strong enough to give GTX date display kit. Finally, the old method of removing the entire top cap to fill the tank, again adding to the feeling of the date of vaporesso luxe 220w click in. Especially because they often own cause tank a shake, forcing the user to screw the tank again. Therefore, the deposit may be too narrow to mod, making difficult removal.

Although LCDs are looking dated and uncomfortable bite clutter your method. GTX Vaporesso One largely a step in the right direction for those who want sheath device. But love Vaporesso GTX MTL coil. In addition, the device is most suitable for electronic liquid containing 50 pg.

However, although the GTX itself is not strong enough for the likes of GTX mesh coil 0.2Ω. But he has not found Vaper new TLD and monitor long GTX.

You can buy here: vaporesso tank

sourcemore thanks