Comment with vaporesso tank gen 220w swag target pm80 gtx renova zero luxe

Vapeciga vaporesso gen 220w received the purposes of this review:

Color Xros Vaporesso:

– blue
– Matt Gray
– Silver
– Blue sky
– Pink roses
– Rainbow

specification:

– Size: 112mm x 13mm x 23mm
– capacity of the cartridge: 2 ml
– Battery capacity: 800 mAh
– Output: 11W / 16W
– Cartridges: 1.2ohm networks sheath / sheath networks 0.8ohm
– Load Type C 1A
– adjustable air flow

In the frame:

– Battery VAPORESSO Xros
– 0.8Ω Xros VAPORESSO POD (2 ml)
– 1.2Ω Xros VAPORESSO POD (2 ml)
– Type C USB Cable
– User’s Guide
– Warranty card
– Reminder Card

Vapeciga swag kits available in 6 different colors. You will receive these devices in a pretty package with two cartridges in the well. build quality of the device is good, everything is as it should be. In the device, you can see “Vaporesso”. This device is low, the dimensions of the device 112 mm x 13 mm x 23 mm.

From below you can see the holes in the magnet cartridge and air. Therefore, the cartridge remains in place because the magnet and the magnet is good, the cartridge in its always nice place. cartridge capacity is the capacity of 2 ml nothing for the armor system. You will receive the coil unit with networks in which it is installed and receives a packet network 1.2ohm cartridge.

From the top of the camera you can see the slot inside the cartridge and you can see the magnet that holds the cartridge in place, you can also see the connections and ports airflow. On one side of the device you can see the shutter button, not very clicky but it works very well. Therefore, this device has a shutter button you can press to vaporizer and also has an attractive switch circuit is very nice because you can use both. shooter is activated, it works very well and is very sensitive. Here you can see the light of the shutter button and battery indicator LED lights in three colors:

– Green: 70% to 100%
– Blue: 30% -70%
– Red: 0-30%

On the other side of the camera you can see the air flow control, so here you can adjust the airflow is very good. Here you can scroll left and right buttons to adjust the airflow. In my opinion, the system airflow of the device is very good and I really believe we can adjust the airflow here.

The target pm80 pod show new feels very comfortable in hand. As expected, it is much lighter than twice mods I-18650. With the dimensions of 112 x 23 x 13 mm in all Epileptic pockets which makes it a perfect vaporizer be out.

It seems to be more durable finish. I dropped Xros on the porch of the earth, just because it is very soft and I forgot that I was resting in my lap when I am. But I could not find a scratch after the accident.

One good thing is clear sheath with a good view of the liquid level. Interestingly, in my quick research, it is not a standard pod have fried. But for me it is very important, I should be able to check the level of the liquid is easy, even in low light.

the battery should be enough to last a working day, provided that no Vaper is linked. 0.8 Ohm Pod generally VAPE pods 3, corresponding to 6 ml of liquid-e. Battery indicator 4 pod began to change from blue to red, which is when I put it on the charger. If the battery is completely depleted, it should be possible vaporizer 8 ml of juice before recharging. And with a 1.2 Ohm coil, battery life is obtained.
loads very fast. I do not do the right steps, but it took me less than an hour to fully recharge.
By the way … I like the USB-C port, which oddly enough is not standard.

You can adjust a bit tight for MTL opened completely, as desired. Depending on the definition of DL, which can also perform vaporesso gtx click in limit DL when set open.

The first is that I have to pull a little harder than I’m used when a tie is taken. When not pull enough, the automatic drawing does not work well and the reel began to chirp. But you can avoid this by adjusting their drawing techniques.

On the other hand, at least in my hand, there is a certain amount of accumulation of condensation on the inside of the funnel / chimney of a boat that ended in the mouth. Not bad, but maybe you can make either version 2 or higher.

Another point (very low) is the position of the cursor control air flow. As some reviewers have mentioned, you can easily cover the air inlet with your finger. But after a while you get used to the position with the index finger does not interfere with air circulation. And for me consider using the keyboard. With the activation of the draw, which tend to have more Xros basically eliminate the problem altogether.

My spirit:

Vaporesso Xros is a small shield system and the device is easy to use. You can buy these devices in 6 different colors are good. Good package, receive two cartridges inside. build quality of the device is good, everything is as it should be if you ask me. The cartridges are held in place very well, it is a good transparent as seen in eLiquid. 2 ml capacity cartridge is a good capacity for the small gondola system.

On one side of the device you can see the shot button can be used to renova zero vape get code and we have an interesting switch is activated, which is fine. This device has a built-in battery, this battery has a capacity of 800 mAh capacity for both small pod. Moreover, we have here the USB Type C ports for charging the battery.

I personally prefer the 1.2ohm coil because it is better for MTL airflow and tight in my opinion. In the air flow near the 0.8ohm coil expect a hot vaporizer. Xros in my opinion is one of the very good systems sheath is, has everything you need and if you want to buy a pod system, must be taken into account.

drawbacks:

– Actually no complaints about this pod system, which is a device that is very good, but if I had to choose anything, I can say it would be good to have a coil replaced, not really with

Pro:

– Good build quality
– funnel comfort
– easy to fill
– transparent Cartridge
– Two cartridges in the package
– pleasant stay cartridge into place
– adjustable air flow
– The good taste
– shutter button and the switch is activated to draw
– 800mAh
– The battery indicator
– c Usb

The following is very demanding: I have an LED indicator located above the activation button, not below. Because when the device on or off, LED blankets my mother is closed so you can not see. But honestly, it’s not really necessary.

And for those who prefer the shutter button is activated, the Vapeciga vaporesso luxe 220w copy tangible deactivation given the opportunity to continue with the drawing of a second or after the release button to prevent the accumulation of condensation in the funnel.

I like Vaporesso Xros, and now my head off vaporizer. I find it satisfying and tasty vapor, large battery and a small device, of course, it was small. What makes it stand out from the crowd is airflow to the rear slider. I have not been in much of the size of the pod kit that offers something similar.

I can not recommend Xros for those who want a small pod system for using MTL. This is a great small vaporizer.

You can buy here:vaporesso tank  https://www.vapeciga.com/collections/vaporesso sourcemore thanks

dovpo vape vv box mods squonk basium topside dual review

Vapeciga squonk box spray is the latest producer Dovpo. I have a ton of their product, but as they do VV mod M a few years, and dead and double work mods Squonk superstructures were also very good, so overall a solid company formed my limited experience of the end. D-salt is a capsule type system is simpler pen refills with pods and 1500mAh battery built in and breathe fire. It is available in 5 colors red, black, gunmetal, rainbow and blue. It looked around online price of about $ 30 for a kit and about $ 5 per pod, so the price is fairly standard.

 

Specifications of the manufacturer:

integrated 1500mAh

Output Voltage 3.0-4.2 V

Micro-USB charging port

1A load

in the drawing

Output depending on battery

Max 26W Watt

integrated protection

LED indicator

compact Memory Stick

zinc alloy construction

118 mm by 22.2 mm

E-liquid viewport

510 Drip Tip Compatible

Coil specifications

0.5 ohm

Single Coil mesh

silicone plug Juice

Top filling

Included in the box:

A d-salt Devices

Recharge the sheath

User Guidelines

Micro USB cable

Albums

album

 

Battery Travel

Vapeciga vv box mods is a pen style AIO (all in one) Pod kit, which means no mod or a separate reservoir that can be used with other things. It has a replaceable pods for spare parts, but is sold separately and coils integrated into Caliburn as Renova or zero. Intelligent design is similar to the kit as GEMM freemax key DTL then most of the System monodosis a little larger than most, but I like the personal design. No adjustable air like most legumes so it’s not much but it nice when it comes to a choice. It has a standard capacity of 2 ml. Stored in the 1500mAh and is not adjustable output devices. It has a built USB charging with the level recorded 1A. I tried 2 times with USB line and meter the level of fees charged to the specifications .91A Max is as good level positions 1A listed. It was a total cost of about 1 hour and 45 minutes. In size the 1428-1439 mAh battery solid again with a note 1500mAh recorded. Damn good rank in dovpo insurance. Passthrough vaping and most (cost passthrough while without pause) if u can hit while charging. Another interesting feature is that a standard of 510 drops in this way can use one tip itself, but as a suitable metal, including personnel.

 

The basium squonk shew new very well built, and a bit on the heavy side. I knew Cat black matte black body is a shiny metal parts bronze. It is a very nice and simple device, my only complaint is painting. Mine already has a lot of chips in only a few weeks of use. I can not imagine how it will be months from now. They have to do a better job in the paint. The pods are easy to install and remove. In an unthreaded tip blade 510 and just falls out the sheath. It is held in place by the top of the cover that is well done and has a good thread. fill pretty basic. It’s like a rubber stopper style in which only pop and fill pods,

 

Usage is quite simple. There are no buttons or settings or anything. Just breathe fire. LED low battery LED pinhole below the USB port. I wish it was easier to see when vaping well that’s the only time he has been active to see the level of costs. LED is green to 3.95V or more to 3.65v to 3.95v Blue and Red 3.65V or less. the distance is good overall, but I hope there are not 4, but no big deal. pod fortunately clear and while it is fully enclosed in the battery is not good and juice large window that makes it easy juice is level to see that big.

 

coil performance and details

The dovpo vape mod get code comes with a 1 Pod is just sad. All kits should always include two coils / pods. They sent me two more sold in one package. There is a coil selection for this kit is 0.5 ohm coils KA1 nets. I use it every 50/50 and 60/40 juice salt nic 20-25 mg of nicotine. That said, they are all great flavorwise. These are the first level devices with interesting flavors definitely a bit more spacious and Caliburn but tighter then north a. He is a coward draw MTL. Coil life, however, was under par. I can get 14 ml of 1 coil, but the other two only lasted me 6 ml. cut out of the life lacks additional 2 to 3 reel them are good though.

 

pro:

Colors (5 results)

Standard capacity 4 ml

Good quality battery

right size for easy transport

a good note for the battery size

Good rating for the level of costs

the cost is quite fast (1: 45min)

pods are easy to remove and install

easy to fill

passthrough vaping

excellent life of the battery

a good sense coils

clear and beautiful pod juice window

Standard tip 510 drops

The inconvenients:

2 3 coil has a life shorter than the coil

drove hard to see when vaping for battery life

equipped with a coil only

bad paint job

Conclusion

So with all that said, I recommend this POD kit or not? I do not like hard or not, which is what I need to 50/50. My two biggest complaints is the second of three coils have a lower life expectancy. If lasted three good I would lean a little more towards yes. The other is the paint job. It’s bad enough. Your already chipping. It’s not a horrible device, even if I had a lot of them were pretty solid overall, but not really worth running to buy. I will not add to me dovpo topside dual click in associated spreadsheet below, you can check if you are in the market for anything.

 

It was Anthony fried keep only honest, I hope you can all say the same thing and I’ll catch you at the next review.

 

rejection of products

This product was sent to me from Dovpo

comments Disclaimer

Due to possible differences QC your experience may be different.

critical warning

I did a review vape since late 2016 and has performed over 400 comments to date. I like to help vapers in the forum and contribute to the community a great vape. I’m not “off the beaten path” reviewer. I do my best to be full at any time and have considerable experience with many products to say what is good and what is not. All mods are tested with an oscilloscope and test stress and the results are displayed in my review.

You can buy here:dovpo vape  https://www.vapeciga.com/collections/dovpo

sourcemore thanks

 

dovpo mod m vv squonk basium vape nickel 230w topside review

Hello everyone and welcome to a new examination. Today I’m going to box mod by vpeciga Dovpo squonk mod. Squonker successful tape mechanics, Squonk remove the bottle, hybrid and what do you get? The clutch … The clutch is what you get. This system is basically like taking SQ217 Tips signature and turn it into a compact mechanical mod. I’m a fan of the SQ serial device, so I have to say is something that excites me a little. I’ll take a look under the hood, see how it goes, and I will give the advantages, disadvantages and test ole baik’OVEN to the bottom. Let’s get right to it?

 

WARNING: This unit it was sent to me by Dovpo for review.

 

WHAT YOU GET

 

mod mechanical clutch

paperwork

 

Available in black, green, blue and red.

 

Dimensions: 79.5mm x 35mm x 27mm

Battery: 21700 Single

Power range: Techniques

 

Other features: on / off switch off buttons customized advisory firm (SQ Topside style)

 

Since DNA75C smart has existed for a long time, I feel and I especially her. This is more or less a summary, so let’s go from start to finish how to operate it.

 

Part 1 – Bay battery – vapeciga dovpo m vv is behind the magnetic attachment to the door. SQ Same as previous devices, remains firmly in place and twisting machine when installed. The only it appears batteries easily and do not have toys. To remove, just to the side of the back door so you can get to the other side.

 

PART2 – atomizers and 510 – This unit can handle up to 27 mm without atomizer cantilever. 510 presents a large plate with a spring loaded plate 510 is fixed with screws and motors up flush. No atomizers treatment of all problems should sit flush instead. Atomizers low plaque size of 24 mm exhibit bright, but for most, is hidden.

 

Part 3 – Operation – As I said immediately, I will not delve into that chip a lot. 5 clicks of the shutter button lock and unlock the device. Three clicks aspects highlights of the screen so you can navigate and make changes. Finally, it is a DNA chip to connect to a computer you can adjust Dang near the screen and settings. This is a chip that is intense and deep that most people just use the tip of the iceberg.

 

FIRST IMPRESSION

 

Ok, so my first impression will be the same as those who have had one, but go … it is compact. Even the box it came smaller than some of the pod systems have received. As I said in the introduction, because erase some SQ squonking and go to the hybrid, the shorter is high, and also the depth, so it is one of, if not the only, 21700 mechanical mod there. Beyond measure, I think the quality of the overall development is top notch as well. strong magnetic strong body, doors and doors fit perfectly still place at all. As I passed the door I seem to have added a few touches as well. A 3d sleigh printed battery, which is where the bus, battery, and carefully place instead of the switch. PEEK also added insulation on top, even if the atomizer to remove the battery, it is difficult short of the device body. This is a key factor when I enter this use, and well thought their idea. Another thing that caught my attention was a little on / off at the rear. Blocks the generation of the light bar and allows clutch shot in the pocket without worrying shooting. Small details make a lot, so a simple device that is much more convenient and secure. SQ217 as a fan, I could not be more impressed by what they do to keep it compact, but still has all the great qualities we see in the SQ mods.

 

BUTTON / MECHANICAL OPERATION

 

If you used the basium vape show new, knows that run button trigger finger style slot set in the device. Mod because so compact, I think I’m not fully grasp mod as it did before. Mino usually busy with three fingers in the throat and thumb on the back, not the palm. I was a little weird at the beginning, but it becomes second nature for you to use. Button still retains the feel is very similar to the SQ mods, but now has a flat bar on top of the assembly 510 squonking. It has a large flat surface, giving a solid formation to feel that a button is pressed. The tension is similar to the SQ button too, so if you’ve used one, you get very familiar.

 

Unlike the way this is all that is a hybrid connection. To use it correctly and I recommend that does not involve tears Mend previous atomizer batteries, which then allows the battery to fall essentially of, or who can help pushing through a mod. Remember PEEK insulation on top? This is where it is a key, such as a battery can move freely up and down without having to worry about a short circuit across mod. This design works well, however, it is also one of the falls. According to the atomizer use and length of 510 pins, change the amount of energy that is between 510 and negative battery contacts at the bottom. Using 510 atomizers again, this put more pressure on the bottom bar of silver. Uses the most widely used and finally be able to get neglected. Mike dizzy himself even posted a video showing how users bend the top bar to adjust the time for it. On the other hand, if a sprayer is used with a short pin 510 batteries may be lost outside the door and toys in bits. bar setting fire to care about her and that lasts long. It works great and all, but looks like it could have done something different for adjustment. I can see that the bar has been weakened over time if this machine is used a lot. Finally, only interrupted when the metal can not be folded slips back and forth always.

 

Reflections end / HOW fried

 

Ok, so in turn the most important aspect of any device, and talk about performance. In all honesty, I would have trouble finding a suitable mechanical device hit 21700 and is compact. I use it all the time mechs and continues with a device that costs three times more. It is efficient, compact, and has more advantages than disadvantages. First Pro, it is size. Very handy to throw in your pocket, and means remains in the garrisons, no matter where you put it. Secondly, it is the details that involve safety. PEEK insulator is a nice touch, but it has an on / off switch is a great victory. I wore wicks because I always felt there was an opportunity to enjoy a pocket with 99% of them. These sandals, throw it in your pocket, and you’re good to go. Another advantage is the quality. I always feel dovpo nickel 230w mod click in have some form and finish of the aluminum engine devices, but this is up to them all the qualities to do is mass produced in China. Dovpo really stepped up their game with the department and it shows. Last Pro is a vaporizer overall experience. As I said immediately hits. I do not feel a great tension and fall flat appearance. However, although it has some great benefits, there are some things that should be addressed. First, it is the way they executed a hybrid connection. atomizer must be loosened to remove the batteries. Of course, you can just push through, but you can get the tears do. Second, private-ness (is that word?) Of the battery it depends on the length of atomizer 510 and occasionally, even if it is used atomizer can begin to cover all buses and separate. Of course, some bent over holding for now, but it seems this requires long-term problems and can lead to a total failure on the road. With the last thing I want to talk about ergonomics. It is impractical for use as mods SQ. With less depth to handle the full mod, now I’m done more subtle (little finger out!). This is not a deal breaker because it becomes second nature, but certainly not comfortable to use.

 

Ok, so there are advantages and disadvantages, but these disadvantages, for me, acting like a deal? Absolutely not. I really enjoyed using this mod. It is one of the few mechanical modifications leaving home and feel safe to do so. The compact size is a curse and a gift, so a little weird, to be held but a big win in portability. However, the greatest thing he has for him is performance. Surprisingly good results and I use it all the drawbacks seem to hit a background in my mind. If that were not enough, add security features make it one of the best mechanical mods for someone who wants to enter them without spending a lot of money either. Well done Mike Dovpo and fried. This is a sweet little device.

 

TEST FOUR – If you accidentally falls into the pizza oven, I’ll get another? Definitely get another. No question.

 

Pro

 

compact

lightweight design

21,700 batteries

FITS 25 / 26mm without false

Press felt strong

The safety switch / OFF

Useful easy to clean

Hits hard (klise’cara say)

Great fit and finish

 

COUNTER

 

connection busbars hybrid drive (detailed above)

Ergonomics is a little weird

 

Thank you all for reading and thanks for sending topside get code a way for me to review. I saw it online for about $ 90.

 

Dave pizza – provides real criticism without additional ingredients

 

Review Criteria: I use all elements for about two weeks I have collected enough data to write critical enough. I use the same e liquid in the tank or RDA through all my critical to ensuring that compare apples to apples among all modern appliances. I put a notice until I am convinced that I have used enough to give an educated critic. The reason I started doing because critical of poor decisions in my time buying vaping there are about two years. At that time, I bought a few different pieces of hardware without really enjoyed it and hope people spend their hard earned money so smarter than me! **** Please note that some items I can get preliminary version and not the retail packaging. The quality may be less than the finished product and what is in the package could be different from the packaging and retail.

 

You can buy here: dovpo mod  https://www.vapeciga.com/collections/dovpo

sourcemore thanks

 

 

Review about vaporesso tank gen 220w swag kits pm80 gtx  renova luxe

A vapeciga vaporesso gen 220w mod kit adjustable coil storage tank for its GTX coil favorite. Delve But let us review GTX One more.

These products were shipped to Vapresso generosity so to stand the test side. other thoughts you find below are my own and are not affected by the fact that this talent.

Please note that this article may contain affiliate links, which helped fund the spray site Make ‘N’.

introduction
No doubt GTX coil popular because it tastes. But until now, the coil has been limited to Vaporesso duct system. In addition, with the traditional style of the tank is Vaporesso GTX answer to everyone’s dreams? 40W mod or have adapted to the internal battery of 2000 mAh, stopped a little short of the mark? Discover and learn in this review Vaporesso GTX One.

The contents of the box
Here is a brief summary of what you can expect to see with the kit included Vaporesso GTX.

Vaporesso filling GTX One
1x Vaporesso GTX A Mod
1x Vaporesso bubble GTX deposits 18, 3 ml (TPD 2 ml)
1x GTX mesh coil 0.8Ω
1x GTX mesh coil 1.2Ω
the glass tube rectilinear 1x
Bag 1x O-ring section
1x USB cable C
1x user manual
packaging

Vapeciga swag kits typical packaging style, color and packaging reflects the options selected image color GTX Vaporesso One. In addition to the laminated image GTX is needed before most of the space. While the side showing the key elements of a Vaporesso GTX as icons. Also on the back are the specifications, content, logos compliance warnings from the government and authenticity checker.

Removing the cover reveals Vaporesso GTX tanks A and 0.8Ω mesh coil pre-installed, seated in a plastic inlay. While resting on the side is a glass tube to the right and substituting 2 ml O-ring. Also under the inlay it is a USB-C coil wire mesh GTX 1.2Ω and manual.

manufacturing quality

Undoubtedly Vaporesso GTX One is thin and mostly looking smart kit. In addition, curved lines and chrome mods attractive contrasts well against honeycomb footprint was blue, which includes most mod. In addition, the pad portion Mod hidden nature of the metal, flavor and grippy neoprene.

Although a GTX equipped with a tank weighs only 118.6g, mod feeling is still strong, but not as robust as the finish line PM80. However GTX still feels like a happy’ll take home device. Although time will tell how the chrome finish has a capacity for everyday use and abuse.

Of course, like chrome front cover it is formed as part of a larger, who joined the line is impressive dish. The following button can turn your answers without feeling too plasticky. But C-USB port on the front of the mod is a bit uncomfortable, but more on that later.

Although the LCD screen is easy to read, it is safe, or worse. In addition to providing fonts and icons they are not as well equipped as the goal PM80. This has led to the emergence and GTX Vaporesso looking a little dated. Also houses the internal LCD or oblique, and although only a few are still visible.

510 connector

While plates 14 mm 510 whose happy tanks Vaporesso 22mm target storage. The thread is important to carefully and sweet pin 510 has a relatively rigid center. This gives some confidence in the long-term use. In addition, the center pin seemed to cast about 2-3 mm, which is good to see.

A GTX tank 18

Visual target pm80 pod show new GTX tank 18 similar mod. In addition, the tank after the first inspection is left clean and odor of the manufacturing process. However, if cleaning is recommended in depth.

The important thing is to put at the top and bottom cover GTX A tank 18 is cut correctly and working properly. In addition to good coil housing land and unlimited cutting burrs expected.

 

Similarly, out of the tank and ends well when there is little knurled However, it was also cut. Despite the absence of control ring facilitate air flow with the lines of a decent easy to use. Be airflow hole is cut clean inlet 5 be either fully open or fully closed.

Cut
Dimensions 127.5 GTX Vaporesso tank equipped mod means higher than the basic model at upper end drops. In addition GTX A mod is 22.7mm wide and 29.3mm deep from front to back.

usefulness
Vaporesso GTX One is at 5 measurement, click on the shutter button. In addition to pressing the shutter button three times quickly to lock GTX One. Preventing accidental setting changes. To unlock repeat the process.

In addition, holding both up and down at the same time to open the settings menu. This allows the user to change the mode of the vaporizer GTX One. But unlike the latest version of Vaporesso, instead of fighting for breath. Oh dear! LOL.

mode

As we have faster access to the different modes that are taking place and the same time. Once in the settings menu, you have access to a variety of modes available in Vaporesso GTX vaporizer One. Goals are important because of PM80 Vaporesso SE, there are no restrictions on how such watts output power.

Smart VW – Intelligent Variable watt
No doubt VW seems smart to produce a vaporizer little warmer, regardless of the setting. On the other hand, I think it raises a vaporizer in early watts, watt is then reduced slightly. However, it is very subtle and difficult to say for sure.

Variable watt – VW

Set default when the vaporesso gtx get code mode allows the user to select the desired output power of 0.1 watts gradually turns. It allows the refinement of the vaporizer experience.

VV – variable voltage
As VW same methodology, while the watt is used to control the output. Instead voltage is used as an output of the driving process.

failure
In selecting a menu option in the factory default setting GTX A restored, if any.

Battery use

While the GTX Vaporesso internal battery is 2000 mAh, the economic good of the battery with the bobbin. Moreover, with the indoor coil it requires less energy than the others in the line GTX, the battery life on a typical day. But, as always, it depends on personal use. But with GTX More MTL led vaping, MTL most users will be satisfied with their performance.

Although it determined by the level of charge through the USB connector 5V 2A-C. But I get Vaporesso GTX A 5.08V 1.53A with the cost, which was a bit disappointing. In addition, the USB-C placement in front of a large device back toward the cable. Furthermore, this makes the remote device or the other side or on the side during loading. Therefore, you can display the current charge status a little uncomfortable. But it is not a determining factor.

However, GTX An interesting feature is the approximate charging time is displayed next animated icons and battery level. In addition, if necessary GTX One stop charging if a spray is needed fast and continue again after the shutter button is released.

Fill in
Vaporesso tanking GTX A 18
Although the cap filling method remove the top and all very easy on Vaporesso GTX One. But it can be a little uncomfortable and want to look good style rear bayonet or by pressing the top cover. Especially when unscrewing the cap, the reservoir can start unscrewing. Therefore, the tank must be tightened. This can cause the tank bolted to the mod, and it is difficult to remove. But one of the benefits of removing the top cover is that each bottle size E-liquid can be used.

Eraser

A reservoir 18 renova zero vape click in airflow

Undoubtedly, the design of the GTX Vaporesso A tank airflow is designed to produce both interesting and somewhat limited MTL DTL spray. In addition to smooth ring control air flow is fully customizable. Because the air inlet 5 is open or fully closed draw much stricter. In addition to defining the airflow remains pleasantly smooth vaporization.

Replacement spool
Vaporesso GTX A replacement tank coil 18
Although the use of a traditional tank GTX Vaporesso dam easy to change the coil in one dose of Vaporesso system. In addition to changing the coil remains the method of “Plug N Play” to enter. However, it still can not change the coil with a large number of e-liquid is left. However, with the old reel, the new first coil put some e-liquid in the coil, and removing a lock down each hole. Now the new coil appear to cart and fill if necessary. In addition to leaving the coil support device for a while to ensure that adequate saturated. I prefer to let the whole 10-15 minutes, then the vaporizer.

GTX mesh coil 0.8Ω 12W-20W

axis mesh well for GTX 0.8Ω 70VG Undeniably, but we chose not chained vaped. On the other coil, they prefer some air. Plus approximately 3 1/2 hole in the air flow control is very suitable for this coil, regardless of the content PG e-liquid. In addition, when vaped to 18.5W and lemon meringue 70VG e-liquid flavor profile does a reasonable job. But it’s not crazy. But the fishing flavored salt when Nic vaped 20 mg e-liquid flavor much better.

GTX mesh 1.2Ω coil 11W 7W-
Vaporesso GTX mesh coil 7 1.2 – 11W
While the GTX 1.2Ω mesh coil may take some time to break. But when it happens, the production of 50 pg e-liquid flavor and much softer than the unmelted replacement spray. In addition, press the groove 20 mg salt Nic pleasantly well without violence.

Chipset and Protection
Supported by the chipset is not specified, the GTX Vaporesso A offers the following protection mod levels.

10s overtime protection – protection against accidental shootings continued.
Protecting low resistance – Avoid growth when breaking coil or together.
high resistance to protection – Protection against fire when the coil resistance is too high.
No load protection – is triggered when a tank if it is installed.
short-circuit protection – a form of protection against surges.
low voltage protection – Preventing battery level is reduced to a point of no return.
discharge protection – similar low voltage, but shows low power.
protection of goods – Protect your device and a battery of dangerous overload.
USB Input Protection – prevents damage to the high voltage stop the charging process.
specification
Kit GTX Vaporesso
29.3mm dimensions (D) x 22.7mm (W) x 127.5 (H) mm (dropwise including Tip)
output power range from 5 W – 40 W
0.15 Resistance Range – 5Ω
battery type and quantity of 2000 mAh internal battery.
Intelligent mode is available watts, voltage, watts.
Materials – An illegal GTX Mod
Materials – Stainless steel tank 18 GTX, Pyrex ??
goals

More often than VAPE device having a paste or two. Especially in the case of the GTX model One there are some small problems with the screen. First LCD if you tilt and tortuous. Both use a particular screen is strong enough to give GTX date display kit. Finally, the old method of removing the entire top cap to fill the tank, again adding to the feeling of the date of vaporesso luxe 220w click in. Especially because they often own cause tank a shake, forcing the user to screw the tank again. Therefore, the deposit may be too narrow to mod, making difficult removal.

abstract
Although LCDs are looking dated and uncomfortable bite clutter your method. GTX Vaporesso One largely a step in the right direction for those who want sheath device. But love Vaporesso GTX MTL coil. In addition, the device is most suitable for electronic liquid containing 50 pg.

However, although the GTX itself is not strong enough for the likes of GTX mesh coil 0.2Ω. But he has not found Vaper new TLD and monitor long GTX.

You can buy here: vaporesso tank  https://www.vapeciga.com/collections/vaporesso

sourcemore thanks

smok vape nord 2 RPM80 Pro mag trinity alpha Nfix Kit 25W review

Vapeciga smok nord 2 water resistant, shock, 18650 mod with TFV9 tank. Let deepen this comment Smok SCAR-18 and TFV9 and more.

 

This product has been delivered to Smok kind of generosity for the purpose of impartial examination. Other thoughts you will find below are mine and are not affected by the fact that this gifted as an examination of the sample.

 

Please note that this article may contain affiliate links, which helps fund the site vaporizer Make ‘N’.

 

Introduction

Undoubtedly the vaporizer device looks and style is subjective for me Smok SCAR-18 with a kit TFV9 coil storage tank is good research. While SCAR-battery 18 is powered by a double 18650 and driven by the chipset IQ-X. IP67 is also waterproof and dust, and also according Smok shock. TFV9 Smok Other features capacity of 6.5 ml e-liquid and a new look. But it is Smok SCAR-18 and TFV9 without any problems? Let’s take a close look review of Smok SCAR-18 and TFV9.

 

The contents of the box

Here’s a quick summary of what you can expect to see included with Smok SCAR-18 and TFV9 kit.

 

Smok SCAR-18

1x Smok SCAR-18 Mod

Smok TFV9 1x 6.5 ml (2 ml TPD)

Maille V9 2x 0.15Ω Coils

1x Replacement glass bubbles (TPD hetero)

1x Micro USB Type B

1x user manual

packaging

Distinctive packaging laminate Smok forward with color options for photographs Smok SCAR-18 and TFV9. In addition to the content of the characteristics of the case, the main characteristics and authenticity Auditor. While back in the function of normal health warning.

 

Then remove the box cover, revealing the manual and mod Smok SCAR-18 being in a plastic inlay. Also under embedding sitting Smok V9 TFV9 with a tight coil to the water pre-installed. While the coil, glass, and a USB cable replacement to sit together.

 

manufacturing quality

Image of the side panel of the bronze SCAR-18 mod Smok

Undoubtedly, both Smok SCAR-18 with the kit TFV9 tank is good looking, although I prefer the black version and in the opinion of the SCAR-P3 and P5. However, rubber coated matte bronze finish, Smok SCAR-18 looks and feels good. Marble effect palmrest provides not only a lot of grip. However, because it is a little sweet, very pleasant to the touch. While SCAR-18 weighs 183.5g, weight is a very strong sense of mod and sturdiness.

 

Images of the dashboard Smok SCAR-18

Similar to the show new RPM80 Pro is not present in the front edge of the plastic fairing. Furthermore, the design is very neat and key sounds are both sensitive and well positioned for easy use. In addition, the design of the LCD screen is nice and clean. But people with impaired vision may have difficulty with smaller readings. However, none of the usual color theme options to divert attention from the arrangement, which is great to see.

 

Although usually not the sharpest LCD Smok, the SCAR-18 LCD screen looks sharper. Of course, this makes the small screen a little easier. But in a review sample of glue residue include LCD. While this is slowly emerging, yet it is unlikely to receive the MOD with adhesive covering the screen.

 

perhaps there will be many disappointed by the absence of C-fast charging USB connection. However, it is always preferable battery charger 18650 is primarily responsible for making the foreground.

 

battery cover

Photos door the battery compartment on the scar-18

While the great method of SCAR-P5 Smok lock with the launch of push and close the door easily. But Smok SCAR-18 carries only fits without batteries inserted. In addition, after the battery is in the SCAR-18, the battery door was very difficult to close. The important thing is that no blows to the battery accordingly. Maybe I was not possible with the review sample, we will wait.

 

510 connector

Images of the connector 510 Smok SCAR-18

Undoubtedly the SCAR Smok-18 28mm TFV9 right place. But also it house a 30 mm tank without spilling. The important 510 Pine center offers a good level of rigidity. Although the two cutting wire is smooth and silky. This gives some confidence in the long-term use. In addition, the center pin appeared to throw around 2-3 mm, which is good to see.

 

Smok TFV9

Smok photo TFV9 Network

Any first embarrassing red coat on Smok TFV9 is not near as mod, and are visually very visible. Also, if you do not have the care to close the lid, paint thinner and varnish can be removed completely.

 

thread images of the base and the top cover Smok TFV9

However TFV9 own outer knurled countersunk both the control ring airflow and the top cover. While the bobbin thread and easy chimney base. The top of the lid to open and close rigidity begin. However, silicone gasket installed in its place immediately. Furthermore, it remains firmly in place with a silicone gasket, glass remains hermetically fixed without leakage.

 

Cut

Smok SCAR-18

The dimensions of the base to the top of Smok SCAR-18 is 88 mm high. Furthermore, SCAR-18 having a width of 30.6mm and depth of 54 mm from the front to the back.

 

Smok TFV9

The important thing is that there are two different dimensions to smok mag click in. In addition to the standard version has a diameter of 28 mm and a height of 56 mm. While the release TPD has a diameter of 25.5 mm and high 50 mm.

 

utility

TC mode photography in Smok SCAR-18

A time offering no noise watt mode vaping style, Smok SCAR-18 is also equipped with a temperature control. In addition to a quick and easy access to adjust the nominal ohm coil, power and TCR values ​​when the TC mode.

 

In addition to power the SCAR-18 is for use 5 Click the shutter button. Furthermore, 3-click mode is vape with a breath counter reset at the end of the selection. For now, the fire and the same time the lock release button Watts. But for those who want to change the color of the screen, hold down the shutter button and up.

 

VW – Watt Variable

Is likely Watts limited set allows fine adjustment of the vaporizer experience. Especially with Smok SCAR-18 and the control knob allows adjustment increments 1W. Perfect for a good balance coil output power and personal preferences.

 

Ni TC / TC Ti / SS

After the metal helical coil is selected to adjust the temperature around the top and bottom of the keys. However coils ohms (Ω) rating, power and TCR values ​​can be adjusted by clicking the shutter button three times. Followed by pressing the shutter button to move to the desired option and then use the up and down buttons to adjust.

 

Battery use

Smok photo SCAR-18 support

With the double-18650 (not included), the battery performance of Smok SCAR-18 is better than expected. Then on the screen, the battery level icon as the percentage of reproduction is displayed in both. So similar to mobile phones. In addition to charging fees when the remaining time is also shown that it is always nice to see. However, the closing of the battery cover with the battery inserted very difficult and does not seem to be perfect.

 

However, some will be disappointed with a Mini USB connection, and the level of SCAR-18 5V 1.3A max. However, I still strongly recommend not using the model for charging. The importance something special battery charger from a reputable manufacturer will always be a safer option.

 

Fill

filling method Smok TFV9 photo

Due to high design lift and turn the cap. Vapeciga smok trinity alpha not only fast and easy filling. But simply lifting method on / lock pressing the cap it should not be canceled by the movement. Of course, this is a great improvement over the TFV8. But to start with a silicon gasket is a little too tight makes opening and closing rigid. However, it only lasted a few minutes, and then deposited in investment.

 

Smok TFV9 sealing cap damage. They must stand so close.

Important precautions to be taken when the top cover is conducted in the closed position. It must also be raised when closed to prevent damage and remove paint.

 

Eraser

Photos airflow Smok TFV9

Interestingly fully adjustable TFV9 is not so loud in the airflow as another roll aluminum tank integrated into the market. Moreover, in addition to a smooth ring moves the position of the airflow control, the remains of a smooth vape without turbulence.

 

replacement spool

Photo coil replacement is Smok TFV9

A replacing one coil on the coil TFV9 Smok storage tank should be an easy case. But suffers from some problems TFV8 original. In addition, it can be tied coil too good for fireplaces and outside the glass needs. allowing a better grip, but the messy reel. Therefore, the coil TFV9 not be replaced while there and liquid is left.

 

However replace and priming of the coil is a case of taking the old reel. Besides choosing the new coil with a few drops of e-liquid in the fireplace and the coils of each drill hole. screw spindle near TFV9, and filler. The important thing is let stand for 10-15 minutes to saturate the coil.

 

In general, and part of the testing process, leave the coil is used and filled with liquid-I to sit for TFV9 to less 24 hours. Consequently, the reservoir does not leak to the coil or coils 250 flashes. Although the taste is good, more than 250 flashes intermittently flooding COIL leak out of the air flow from the hole.

 

Maille V9 coil 0.15Ω

photograpgh Smok V9 mesh Coil 0.15Ω

Undoubtedly shaft to mesh coil V9 0.15Ω as a champion. Furthermore V9 mesh coil preferred fruit flavors and cola his e-liquid. Furthermore, as the RPM coil 2 0.16Ω, exclusive fruit come through well. But while the mesh V9 0.15Ω coils provide softness and before some liquid. Unfortunately, I did not bring full profile cream and flan.

 

Chipset and Protection

While get code SMOK Nfix Kit 25W has the IQ-X chipset players experience vaporizer. In addition to IQ-X offers the following levels of protection.

 

Low battery (Overvoltage protection) – block-level battery has dropped to a point of no return.

Ohm too low – cut Security.

Ohm is too high – security court.

Brief atomize – cutting up, the coil can be blown.

PCBA too hot – high temperature protection, both the protection of the electronic card and battery.

Timeout 8s – Protects against accidental firing continued.

Although there is no specified protection for USB. However, it would be reasonable to assume that there is some level of protection.

 

specification

Smok SCAR-18 Specification 54 * 30.6 * 88mm

Dimensions 30.6mm (W) x 54mm (D) x 88mm (T)

output power range 1W – 230W (VW) / 10 – 230W (TC)

output voltage 0.5 – 8.0V (unselected)

battery type and quantity 2x 18650

Material Mod frame – zinc alloy, rubber coating?

0.10- 2.50Ω resistance range (VW) / 0.05 – 2.00Ω (TC)

Temperature range 100 ℃ – 315 ℃ / 200 ℉ – 600 ℉

183.5g weight

Smok specifications TFV9

dimensions 6.5 ml of 28 mm (diameter) x 56 mm (height)

Dimensions (TPD) 25.5 mm (diameter) x 50 mm (height)

stainless steel wood, silicone seal.

Weight 62 g / 65 g (TPD)

buts

Smok obviously SCAR-18 and TFV9 both had a little niggle with everyone. Furthermore TFV9 suffer coil to be difficult to remove during roll changing. Furthermore TFV9 suffer from intermittent floods and leak V9 mesh coil after coil receives over 250 inhalations. The important thing the rigidity close the battery compartment of Smok-18 SCAR uncomfortable. However, this can only ask SCAR-18 I received for review.

 

summary

While Smok SCAR-18 received had a problem with the door of the battery compartment too rigid. However, it is possible that this is a stop and if it passes Smok SCAR-18 is a mod. More pleasing to the touch and feels good in the hand. In addition, it is easy to use in general manufacturing SCAR-18 mod will continue to use. Although the coil leakage V9 mesh 0.15Ω, the taste is good and good products and soft vape. How important the problem was probably caused by a leak coil and should be treated by Smok.

You can buy here: smok vape https://www.vapeciga.com/collections/smok

sourcemore thanks

review of vape battery smok nord rpm80 coils mag p3 trinity alpha nfix kit

Vapeciga smok nord starter kit one sheath monster with a 7.5 ml capacity and 18,650 dual battery. But it’s too much? RPM160 deepen all Smok this test and more information.

These products were shipped to Smok kind of generosity for the purpose of an impartial review. other thoughts you find below are my own and are not affected by the fact that this gifted as a control sample.

Please note that this article may contain affiliate links, which helped fund the spray site Make ‘N’.

introduction
Probably Smok RPM160 is a monster of a gondola from the unit. Although the 18650 has a double and a large battery capacity 7.5 ml E-liquid. Is this a sign that things are changing in the world of Smok RPM160 system? But RPM160 all the air? Let’s take a closer glance comments Smok RPM160.

The contents of the box
Here is a brief summary of what you can expect to see included in the kit Smok RPM160.

Smok RPM160
1x unit of Smok RPM160
Pod RPM160 Smok 1x 7.5 ml (2 ml TPD)
2x coil mesh 0.15Ω RPM160
1x Micro USB Type B
1x user manual
packaging

laminate typical packaging Smok before with options for color images Smok RPM160. In addition to the main features exposed as icons and text. Although the content behind the box office, the authenticity of the listener, warnings and compliance with government logos.

Advance and remove the outer sheath and the cover of the user manual revealed glovebox device Smok RPM160 preassembled. While USB cable reels and sit together.

manufacturing quality

Although the shape is unusual, show new smok rpm80 pro coils surprisingly slim and stylish look as well as panels carbon fiber false

Despite weighing 120 g without the battery while in the hands of plastically robustness RPM160 denied. Although usability lines remains comfortably in hand nets. Also I liked the form factor RPM160.

While the front fascia is composed of large carbon panels imitation ordered a set of pages and sounds buttons are sensitive to both ease of use and practical.

However, some, I personally do not care may be disappointed by the lack of USB-C ports, since the only chargers supposed to be used to charge the batteries of 18,650.

With the battery inserted, the battery door remains firm and while there was no movement move slightly upward is not visible when handling. In addition to maintaining the battery cover it is easy to open without excessive traction to operate.

Undoubtedly LCD Smok is not the sharpest, and the light that can make it difficult to display bright day without hat in hand. However RPM160 Smok very good disposition. Besides making the arrangement is controlled readable readings. On the other hand, there is no option on the issue of ordinary colors to distract the layout, which is ideal for watching.

Smok RPM160 Pod

As it expected pod smok mag p3 click in own well trained and trained PCTG a little dark

However, judging from the e-liquid level is very good. Pod also has advanced integrated drop by drop, drip tip easy to use and perfectly balanced with the coil covered mesh 0.15Ω.

Furthermore, the fill hole in the back of the nacelle is a good size to facilitate filling mark rotary seals. But while removing the seals, if the car is driven, you can leave behind the housing and land on the floor. sheath remains strong in the use and rock solid when pushed forward.

Cut
Basic dimensions to the top of the device, height 125 mm Smok RPM160 Inc. drip tip. Furthermore RPM160 has a 28.2mm wide and 45mm deep from front to back.

usefulness

Time vaping style offer customized voice Smok RPM160 watt and counter offers breath mode.

In addition to Smok energy RPM160 5 Custom, click the shutter. In addition, 3, click the button drawn fire for preventing the device. For now, the fire and the same time the release button Watts. In addition to the fire button and reset the counter to zero, the next breath.

Variable watt – VW
Watts will likely limit set enables fine adjustment of the vaporizer experience. Especially with Smok RPM160, control buttons allow gradual adjustment 1W. Perfect for a good balance of the power output coil and personal preferences

battery usage

With two 18650 battery, but the battery Smok economic RPM160. More vaping to 62W with 2000 mAh battery will last between 250-300 flashes depending on battery life.

In addition to the battery level for the second screen shown on the battery icon and the percentage of reproduction. So similar to mobile phones. Additionally, when charging the cost of the remaining time displayed is always good to see. An evidentiary RPM160 Smok Smok produce 5.12V increase the ratio of 1.26A.

Fill

Vapeciga smok trinity alpha battery replacement definitely super easy filling, filling holes with good size and joints are twisted way.

In addition, the filling hole is placed at the rear, there is no need to remove the pod for a refill. However, the location of the filling hole can cause problems. Moreover, if the push behind the pod, they can be pushed out of the device and landed on the floor. Therefore, putting a finger in the back of the nacelle to support the opening and filling the casing 2 in kind.

Gum

Despite the lack of air flow established RPM160 Smok, airflow provides DTL vape loose. But the flow of air sucked through the front and back of the product is very gentle spray. Interestingly Smok RPM160 much quieter because the greater the air flow,

spool replacement

A coil replacement is fun and easy to handle Smok RPM160. Not to be replaced with a roll of the remaining e-liquid. But replacing and priming of the coil is a case of taking the old rolls. Followed by the initiation of a new reel with a few drops of e-liquid two coils and a fireplace in each port of discharge. Placed next to the coil sheath RPM160 and recharge. The key is to let it sit for 10-15 minutes to saturate the coil.

One point to note, as part of the testing process, leaving a jacket containing liquid and a carrier for at least 24 hours. Therefore, there is no leakage or duct coil, which is good to see.

mesh coil RPM160 0.15Ω – 70W

No doubt Smok RPM160 0.15Ω coil performs better than expected and its axis like a champ. 62-65W also perfectly during the test. Furthermore Fried Sweet Mango came through very well and produces a sweet lemon curd. In addition, brown sugar crumble gently spray is perfectly balanced.

But do not think that the support coil RPM160 point 0.15Ω. Perhaps because of the size of the coil, the coil continues to produce good taste to mark 600 puff. If the flavor and reduce, it could reach 900 puffs before suffering damage.

Chipset and Protection
Although the CI-160 chipset has a response time of 0.001s, I do not have a means test. But I can say that the response time is very fast without any delay visible.

Moreover smok nfix kit price get code offers the following levels of protection.

Low Battery (protection against surges) – battery pack level has been reduced to a point of no return.
Ohm too low – Cutting Security.
Ohm is too high – security court.
protection at high temperatures, both the protection of the electronic card and the battery – PCBA too hot.
Timeout 8s – Protects against accidental shooting continued.
Interestingly, there is no protection for USB reported. However, it would be reasonable to assume that there is some level of protection.

specification
Specifications RPM160 Smok
Dimensions 28.2mm (W) x 45mm (D) x 125 mm (H) (peak dropwise, Inc.)
output power range 5W – 160 W
the output voltage 0.5 – 8.2V (unselected)
Type and amount of battery 2x 18650
Marco mod materials – plastic Terminals – PCTG
resistance range 0.1 – 2.5Ω
Weight 120 g (excluding batteries)
goals
Undoubtedly, there is little to complain Smok RPM160. Moreover, the only problem was the original car, if pushed too long to recharge.

abstract
No doubt many will Smok RPM160 redundant earlier. However, the economy and a replaceable battery makes RPM160 18650 fun to use. However, several coils is sheathed RTA RPM160 that starts to make sense. In addition, the RPM160 Smok form factor with your back flat and not just the networks RPM160 lines are pleasing to the touch. But perfect to sit comfortably in a jacket pocket or a custom support or belt. With good taste and longevity 0.15Ω RPM160 coil, which Smok RPM160 related to a hit with many.

You can buy here: vape battery

https://www.vapeciga.com/collections/smok

Thanks you Smok

Voopoo Nano Drag 2 Platinum Vinci X 180w Mod Manual Pnp Coils review

Vapeciga Voopoo Vinci X water with a thin profile and refined ergonomics. Can there be anything better? What if the other changes that have been made? Let’s find out.

 

This product has been delivered to Voopoo kind of generosity in order to stand the test side.

 

Other thoughts you will find below are mine and are not affected by the fact that this talent.

 

Please note that this article may contain affiliate links, which helps fund the site vaporizer Make ‘N’.

 

Introduction

 

The airline Vinci Vinci Voopoo expand further. While much thinner profile, Vinci Air retains the elegant appearance of lines Voopoo Vinci. Along with the coil proven, it will definitely be a hit with many. Let deepen this test and more information.

 

packaging

 

Packing for Voopoo Vinci Water is the typical Voopoo style. Both interesting exercise to reduce costs or changes may be in foreign laws is not TPD versions now come with a “WARNING: This product …”. However, compared to the usual logo, photo laminated water Vinci, and the main features. While on the side is an icon of social media and QR codes for technical support, which is always nice to see. In addition to the back of the box is the contents of the box, attached kit color. In this case, Aurora. It is also the beginning of the authenticity, logo Auditor and compliance with health warnings and safety.

 

Removing the outer sleeve revels Vinci air box is perfectly in the foam insert. Notwithstanding white box containing a roll coater, USB cable and documentation Vinci air.

 

manufacturing quality

 

Needless to say stylish and elegant vapeciga Voopoo Drag 2 Platinum carried forward in the design of the water. It also has a little more refined for better ergonomics. shutter button is perfectly positioned to take the thumb. Although the control buttons up and down are perfectly placed on the fingers when held in his left hand. Maybe you are right. Then up and down buttons they are in an ideal position to be used with your thumb without feeling uncomfortable. I liked how the air feels Vinci in hand.

 

Opt for most panels is a black fingerprint magnet and sideways. Otherwise, the body mostly finished in matte bronze adds flavor improvements for Air Vinci.

 

It is the paint finish in the same way as a car, if it is definitely strong. At the same I am about to enter this examination, water Vinci accidentally fell about a meter and a half to a solid floor. Heart pounding, I wonder what kind of damage he had done. Saw what appeared to be a big vicious, a washcloth with your finger and disappeared. No points, bumps, or scratch. The Voopoo Vinci Water is a powerful hard cookie that is safe.

 

As you can see the images in this review. Needless to say this will not be a product Voopoo no point sweeter panel. In the back of Vinci Water is the appearance of pretty good panel in this case, Aurora. Certainly, it is interesting and placed in the back, the eyes of the mind to those who do not like sweets.

 

TFT LCD

 

There is no longer a large TFT color display. Instead there is a color of the much smaller screen is not possible to keep the size down. However, the screen is still quite sharp and bright. But if it had been left out of breath against, which can be full screen high power. When playback ohms can be installed perfectly placed in watts. OKAY.

 

spigots new look

 

Of course, with a sheath of more thin device you have to change, even if the coils are still used PnP Voopoo including RBA. Although there is no loss of user TPD release ted not lost 1.5 ml. But even if vaping in the tank reel MV4 much.

 

While new pods are formed either unfortunately, when pressed with the thumb which can swing back. The important thing gondola never felt he was out of the machine, it is always annoying when you capture every once in a while.

 

air dimensions Vinci Voopoo Standing height 100.9 mm, width of 27 mm and a depth of 18 mm from the front to the back. Today, some may have noticed that the width of the water Vinci Vinci X. In addition, the screen is more Vinci devices more elongated carrier prior point. Presumably to keep the capacity of the gondola up the tank.

 

Please thank our sponsors of this review of the product by clicking on the link and visit your website

 

Voopoo Too 180w Tc Box Mod show new limited functionality. Focus only on a right front, easy to use device only watts.

 

Water is rotating Vinci fire usually 5 Press the shutter button. While holding the shutter button and the top Botton locks and unlocks the device. Moreover, while the initialization, the screen displays an animated logo and Voopoo followed by Vinci Air Gene.AI and the version of the firmware.

 

fashion

 

Back mode is automatically detecting the absence characterized breathing symbol “P”. Presumingly is for cooking press, it is good to see the return of inhaling function automatically. But for those who do not agree, you can turn on or off with the click of a button three fires. A point of note, the automatic fire seems a bit slower to respond than the original Vinci.

 

Watt is controlled by the up and down buttons on the side with a range of 5-30 W. But unlike Vinci X having a low resistance range, air Vinci made in the coil support 0.45Ω. Which will come into play with PnP-RBA

 

One of the notable features that have been removed is the story against blowing. In favor of the counter is continuously displayed on the screen. While holding the shutter button and a button to clear the table and puffing.

 

Battery use

 

Voopoo battery Vinci in water was somewhat disappointing when the coil DTL lasting less than half a day to good use is used. Of course, all this is rather small 900 mAh battery. But with a device of this size, I think a bigger battery would have been possible. As usual, the battery life is always dependent on the use.

 

Load Vinci is water via USB at the top on the side. Of course, this greatly reduces the syndrome fell upon which fell several AIO is suffering. In addition, charging 5V 1A makes it perfect for charging at home or at work.

 

Fill

 

Vinci Voopoo water filling method is the same than previous models Vinci. Silicone gasket sufficient retraction and recharging. It’s nice quick and easy matter. Without the new deposit larger hole, it can use a medium-sized bottle for loading.

 

Eraser

 

Voopoo Drag Manual click in buy is more limited than previous models Vinci. While the air flow is essentially controlled users can change the air flow by turning the sheath 180˚. Although pods air intake in a single hole, the airflow is MTL. Furthermore, the gondola converted into three input ports, the air flow is now suitable for DTL. Allow air flow adjusted or bulk.

 

Please thank our sponsors of this review of the product by clicking on the link and visit your website

 

replacement spool

Let’s start with the question on the lips of most people. It is water leak Vinci Voopoo? Test in sheets Vinci Water with full pod e-liquid for 48 hours. So not fall even after two weeks vaping minimal accumulation of condensation. Moreover, it seems that the curse ended Vinci leak.

 

With it’s easy to replace, simply remove the pods and remove your old reel Plug and Play (PnP). further include in the new coil and left to rest and saturated coils for 15-20 minutes.

 

Furthermore, this process can be accelerated slightly from e-liquid coil before entering them. A few drops in the heat of the coil should be enough.

 

PnP-R2 MTL 1.0 Ω Coil – General

 

Occasionally you get into the coil and the coil problems caused some pain. While the first tests with various flavor exotic fruit 70VG maintenance e-liquid and relatively good that it is 10 – coil 15W. But whenever you take Vinci Air PnP-R2 coil flooding. Although not escape sheath the coil itself becomes more saturated, whistles and spitting in my dissatisfaction. Remember this is 70VG with e-liquid coil MTL, so we did not try to 50 pg.

 

naddition, no matter what method I tried, you would impetuous speed of vaping. even left “dry” coils for 48 hours in vain.

 

Unfortunately, I can not assume I have received a defective coil, it happens occasionally.

 

DTL-MV4 PnP mesh coil 0.6Ω

 

PnP-Wicking MV4 is a dream, even when the chain vaping 70VG cotton continues to rise. The tasteful 4 VM-0.6 Ω Coil Mesh, with a little cream, perfect for liquid-based custards e. Although nominal 20-28 W, I prefer to spray around 23-25 ​​W.

 

protection

 

This Voopoo Pnp Replacement Coils get code with a chip Gene.AI the same as in other models Vinci, giving up eight functions to keep safe Vinci Mod X Mod Pod.

 

10 seconds to protect against burning coil.

protection of battery discharge the battery is not too low and becomes unusable.

protection of the maximum power, which helps prevent the coil from burning.

Output protections to ensure that its output remains within the limits of its protection and water Vinci.

reverse battery protection, to maintain security and water Vinci.

short circuit protection, to protect the battery.

Protection against overheating, the form of TC mod ensure both the battery and electronics are in a safe temperature.

Overload protection Overload protection.

Please thank our sponsors of this review of the product by clicking on the link and visit your website https://www.voopoo.com/

 

specification

Voopoo water Vinci

Dimension 18 (D) x 27 (W) x 100.9 (H) mm

range output power of 5 W – 30 W

output voltage V 3.2 4.2

the type of battery, and internal amount of 900 mAh

Mod Materials zinc alloy, PCTG

resistance range of 0.45 to 3 Ω

buts

Although there is much to like about Voopoo air Vinci, there are two small problems. First for a camera this size pod, I expected he’d seen me a battery that is greater than 900 mAh. Secondly, there is the backward movement of the platform. While the pods are not likely to fall. However, it is a bit confusing, and as such the cost of points Voopoo Vinci quality of the water structure.

summary

With the theme of the creepage Voopoo Vinci apparently overcome water Voopoo Vinci makes for the perfect light kit sheath. Although there are problems with the coil PnP-R2 in the review sample. However, the broken coil strange happens, it’s just one of those things. In addition, many coil it is producing a good taste of Voopoo PnP range.

The only slight decline is a battery of 900 mAh. However, it becomes a device that is lighter and it would be good for a shirt pocket of the summer.

This product has been delivered to Voopoo kind of generosity in order to stand the test side.

Other thoughts you will find below are mine and are not affected by the fact that this talent.

Please note that this article may contain affiliate links, which helps fund the site vaporizer Make ‘N’.

You can buy here: Voopoo Drag Nano   https://www.vapeciga.com/collections/voopoo

The comment about Voopoo Drag 2 Vinci Too Drag PNP

Voopoo Drag 2 Pod Kit is the latest manufacturer frompopular kit Voopoo vaporizer

They burst onto the scene a few years ago with a spray mod and dragging instantly popular and praised what it was before some time, but has since declined slightly. I have significant changes in recent, as well as alpha and zip code voopoo and excellent Pericles RDA, but mostly a lot of disappointment that the slide 2 and an armor system badly. We’ll see if Vinci can reverse this situation. Vinci is a simple rectangular capsule type Pod AIO with parts and inhale and integrated 1500mAh button or fire. Available in 10 colors Aurora, dazzling, green space gray, carbon fiber, peacock, scarlet, ink, opal, jade Bukit yellow and green. Looking around, I saw your article in the freezer of the US line by 39.95 for the kit.

Specifications of the manufacturer:
Gene Smart Chip Case
Dimensions – 104 mm by 25.3mm by 25.3mm
1500mAh rechargeable battery
output power range: 5-40W
Output Voltage Range: 3.2-4.2V
Resistance range: 0.1-3.0ohm
Automatic mode
Manual mode
curve mode blowing
2 weeks of records memory usage
Structure of aluminum alloy and plastic construction
Based on the firing mechanism
Control with two buttons
juice shop windows – Check the charge level
0.96 ” Color TFT
substituted coil – rechargeable Pod
Capacity 5.5 ml refills pods
PnP series of coils Voopoo
Mounting assembly of the coil taken ‘N’
winding intelligent protection
dry combustion protection
microUSB port
coil selection
PnP-VM1 0.3ohm coil mesh – rated for 32-40W (DL) (included)
PnP-M1 0.45ohm single coil – Nominal to 28-35W (DL)
0.6ohm PnP-M2 Single Coil – rated for 20-28W (DL)
double coil 0.8ohm PnP-R1 – rated for 12-18W (MTL) (inclusive)
PnP-C1 ceramic coil 1.2ohm – rated for 10-15W (MTL)
Compatible with Drag Trio Baby Coils
Included in the box:
VINCI apparatus 1 Voopoo 40W
1 Pod replacement Voopoo Vinci
1 0.3ohm PnP-MV1 mesh Coil – score for 32-40W
coil-R1 1 double PnP 0.8ohm – rated for 12-18W
Guide User 1
1 USB Cable
1 GEN smart card
1 Warranty Card
Photo album
album

Voopoo Vinco base Mod Tour

Vinci is a kit pod style rectangle AIO (all in one), which means no separate mod or a tank that can be used with anything else. He replaceable pods for spare parts, but these are sold separately and coils are replaceable and can reuse the basket Breeze 2, Nautilus AIO or North. Intelligent design is very unique, is a type of half mod support the device. It is larger than most other cereals, but for good reason. There the semi-adjustable air in the nacelle may rotate 180 degrees to move DTL MTL. realistic in practice, almost a difference and both parameters are fried limited TLD is done. MTL Nothing in this unit at all. Cool idea, but poorly executed. It has a massive capacity of 5.5 ml, which is larger than most of the nacelle systems. The battery is 1500mAh. It was built in USB support with the level of 1A load and time appears on the list of 90 minutes. I tried both a loading rate of USB subway lines and the maximum load if you notice there is 1.01A. full load in 90 minutes to charge enough brands and well there too quickly. I know that the battery has a copy of a 1509mah notes there. gateway as well vaping (continuous load) so that it can vape while charging. Unsharpened drop by drop advanced part of the nacelle itself.

The Vinci is very well built and feels very solid and good weight. I have a cat peacock is wise metallic luster bronze in particular in the context of all colors and color choice of two side panels. Merak-ish type black / blue and actually looks a bit boring and difficult to see. Panel should be better. It seems almost as bright and vibrant as images online. Pods connected to the battery by means of a magnetic system. They are a good fit in the battery. Nice and strong and take a boat when near magnets. To replace the jump the right reel and is maintained by the O-ring and screw in the north not the wind 2. deprives the car and pull the bottom of the spool to replace. fill pretty basic. One sheath of the sheath covering rubber band must be removed for refilling. Then just pop open the cap rubber and filler. Fill the hole size of the property, so no complaints. sheath fully exposed so there is no need for the window juice. There is also very little color is very easy to see the level of juice. Well there for you.

How to use

The usage is quite simple. This is much richer in features than other Voopoo PNP so it will be a little longer than usual.

I will start by saying the most horrible beyond basic buttons, so you just have to play with the key combination to see what they are doing. 5 clicks fire turns the device on or off. These devices also fall if it is not used and you must click on the fire to get there. There are 3 modes on this camera. Auto, power and second. supply auto media vehicle fire breathing fire with fire, and the two buttons (A & P) allows the use of either. I use all three ways, and everything works fine, but personally, I prefer self. It was nice to have both options and can choose where you want so good out there. Clicking the fire three times your Navigate to the desired mode.

Respiratory support and a menu that displays the number of inhalations per day during the last 2 weeks you are taking is required. There is also a breath counter on the main screen, but repeated every day to blow up for the day. There is no option to fight the breath of life or restart when rotating spool. It was very interesting to have a blow against it, but I want to have control over it. Again a good idea poorly executed, although personally I do not care about the battle of breath. Keeping the fire and clean up your breath. The fire broke out and block the device so it will not fire and can not change anything until firm. cool idea, but again, it does not preclude the automatic fire. You should be able to lock the keys and still breathe fire. Lasty to change the clock to accommodate three (more, less, and fire).

It has a beautiful large color screen with a full battery meter. If you connect displays the percentage of battery as well. I love this device’s screen. It is fully adjustable from 5 to 40 watts 1 watt gradually larger. They have their “dry burning protection” but that shit. Everything watt self-regulated whenever gondola connected by coil resistance. Also it make if the remaining units or in standby mode for a while (like when you sleep). This means that if you pull the veil or fall and then place changed watt. Or in the morning, not when you get up after being sued by a change in watts sleep. The worst flaw of 0.3 Ohm coil is 35 watts also with coil, in fact, their devices automatically coil to burn out if you do not pay attention. Again a good idea, poorly executed.

performance and details of the coils

Voopoo Too comes with one but two large coils

All kits should always include two coils / pod. There are five options for this kit coils in total and 2, including 0.3 ohm to 0.8 ohm coils regular coils clean. The same coils are used with kit trio also take your baby, but the kit comes with a ceramic mat 0.6 ohm to 1.2 ohm. When I checked out of 1.2 ohm 0.6 ohm is not bad, but it was great. Now I have tried to 0.8 ohms available at the time of the baby and the new trio of 0.3 ohms. I started with 0.8 ohms and, unfortunately, not even 1 tank before had major flooding and leaks. Even after all clean and clean up the spill, the right of return. You have to give the reel. Perhaps there may not be lost, but you can not take into account what is in my hands, so there is not much. Then 0.3 ohm coils. I started with 20 mg 50/50 nic salt juice. I put 23 watt models because it took 30 mg is too big for me. It works well. The flavor was acceptable. I vaped tank is filled with 5.5 ml without any problems. Can I fill the tank 3 mg 70/30 juice that is what they say is the intention of the coil. I found the best up to 28-30 watts. It is redundant and 35 burn by default. 32-40 categorized too high. That said, it is good for 30 watts. And not with 70/30 bit of everything and do the rest of the tank. This works best with a high-powered 50/50 less juice-nic for me, but not everything you need and nothing memorable. This device may be best to form a coil 0.6 ohm and the baby kit 50/50 juice. As it comes in a kit, however, was not good.

Pro:
color (Total 10)
5.5 ml large capacity
good quality battery
I was the appropriate size for easy transport Auditor
The sign for the level of costs, the size of the battery and charging time
costs fast enough (about 1 hour and 30 minutes)
reel is easy to install in pods
the platform can be reused (only coil replacement)
easy to fill
good battery
equipped with two coils
gate vaping
fully adjustable output (5-40 watts)
beautiful bright color screen
inhale, push button, or both for fire and option 3 major projects
counter and two weeks of breathing the breath story
easy to see the level of juice (sheath completely exposed and almost colorless)
weakness:
Users do not really much choice
0.8 ohm coils that do not help at all
0.3 ohm coils excessive in watts and can not handle the juice 70:30
Mod electrical reset each time the module (aka productive protection against dry roasted) is deleted
standard power adjustment to 0.3 ohm coils are too high (35 watt)
Air control is not anything significant. No choice as advertised MTL
panel boring and ugly and nothing like the pictures on line dynamic random (see the comparison with the image of the album below)

Voopoo Drag unrealistic expectations about how long it takes to do a review (no serious examination takes weeks days)

conclusion
So with all that said, I recommend this POD kit or not? I do not like so hard or not, but looks pretty easy. There are many new ideas and features of this device, but unfortunately many are poorly executed and aggravate the device. Not only that, but the coil which is not good either. It can be a well with 0.6 ohm coils device form a trio of baby depends watt “dry burning the protective provisions,” but mostly, just avoid this unit to V2 expect a regular feature. It did not help that right panel boring and ugly image. Besides, I had to get your mail only

I made a review from the end of 2016 freezer and has performed over 400 user comments. I like vapers help forum and contribute to the community a vaporizer. I’m not “off the beaten path” reviewer. I do my best to be full at any time and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are presented in my opinion.

You can buy here:voopoo

https://www.vapeciga.com/collections/voopoo

Voopoo Drag 2 Vinci Too Drag PNP review

The Voopoo Drag 2 is the latest model in the manufacturer Voopoo popular and top model have made long. They Mojo earlier this year was a mod and internal battery and pleasant enough before it was nearly a year, when they launched the voopoo also its last double 18650. The mod is a Vmate 18650 mod double nominal battery 200W it is designed to the style of a painting style mod with a symmetry axis 510. focuses on looking around online to see prices in the range of 45-55 USD 55-65 USD China or the US. It is available in 12 colors. 2 frame colors silver or pewter and multiple color options of battery door each including things like wood, green, black, camo etc.

 

Manufacturer Specifications: Mod

Size – 89 mm by 47 mm by 30 mm

Weight – 102g

High Amp Double 18650 – Not Included

Advanced chipset 32 ​​digits GENE.Fan

power output range: 5-200W

Output voltage range: 0-7.5V

Resistance range – power mode: 0.05-3.0ohms

Resistance range – TC mode: 0.05-1.0ohms

temperature range: 200 ° -600 ° F / 100 ° -315 ° C

Supports Ni200, titanium, stainless steel Compatibility

mode setting TCR

POWER Fashion

zinc alloy-frame construction

OLED intuitive display

I divide the battery Bedroom – Located on each side

Shoot Button – Located above the battery bay

Two control buttons – Located above 2nd battery module

Output overcurrent protection

overload protection

discharge protection

Short circuit protection

The burden of the brand Battery Balance

MicroUSB port

510 Access

Available in silver and tin

Emerald green S-S-red camouflage, S-Cascade, S Red S Black Rock, S Wood, S-Surf blue-green camouflage S

P-emerald green, red Camouflage P-P-Cascade, Red-Black P Green P-rock P, P-Wood, P-Surf Blue, camouflage

Included in the box:

Box 1 VOOPOO VMATE 200W Mod

1 User’s Manual

1 USB Cable

1 GEN smart card

1 Warranty Card

Photo album

album

 

 

 

Initial impressions and characteristics

When I got to see this mod was to show that the ECC, and looked very good. The display reminds me of the Voopoo Vinci as umbrella and nova legend, but in black and white and went to the one I love a pin 510 centered symmetrical design. The only part of the design of this model is the buttons and battery doors. The batteries are on opposite sides of the mod as voopoo too, but you can not make a single battery mode as does. The buttons are on the top with a fire button on one side and less on the other. Very convenient to use in each hand. Overall I liked the design from the beginning.

 

Watt execution mode (table spreadsheet and photo albums)

Now let’s get into some data. I ran my normal examinations. I VTC5A Sony batteries for testing. resistance test were conducted at 0.12, 0.16, .21 and .64 ohms. The energy sector were watts max (200), 150, 100, 75, 50 and 25. .12 ohms it reaches the limit of 148 watts and 35 amps. For the rest of the evidence, which was a little on the low side 1-6 watts. lightweight bout but on par with most mods. 0.16 is maximized to 194 watts. The rest was pretty good down 3-5 watts or about 25 watts test. For the test, 196 watt 0,21 maximized. Again very good, but a bit on the low side 2-3 watts except his most 25 test was about 50 and that the test was 1 watt high. For testing, 0,64 is maximized at 92 watts and 7,679 volts. For the rest of the test at a low 1.5 watts, which is common. The Volt shows that there is no pulse circuit in this mod as most dual battery mods.

 

Overall, I think the performance of this model is very good. This is only 0.12 ohms wrong establish common for most mods in a small resistance struggle. It is primarily affected minimum bit. I am able to get 196 watts maximum, so I guess it must be accurately evaluated 200 watts. The limit of 7,679 volts indicates no amplification circuit. a list of its members 7.5V maximum volts exceeding the rating is so good too. They do not limit amps listed in this mod. The more I was 35 with coils of 0.12 ohms at the end of the battery mod double bottom at most about 40 today. Personally, if I list my specifications call 200 watt mod, 7.5V and 35A. Good overall score, so Voopoo. mod was not hot when stressed at all, but it gets a little warm when you are stressed to the maximum watts in high temperature protection. I have no problem with him personally, because I like the safety features and I do not recommend vaping more than 150 still uses the battery and double battery being mod is above 20 A or CDR assessed by exchanges. There is no visible flame and the delay in this mode watt curve mod works fine too. Also get rid of love and modes of great shit and fire mod because you must be on power is not alpha.

 

overview of energy performance TLDR

the performance was very good mod. Most hit a few watts lower. To assess precision watt (196), there is an amplifying circuit, 35. low limit Volt amp tested in 7679 that exceed specifications list 7.5V. Watt curve works as it should.

 

Performance monitoring temperature

Use mode SS SS316 wire tried 6 construction. 2 simple single coil towers, two single-coil double loop construction only one luxury coil, and a double coil construction luxury. At the same voopoo with all mod mods limited to 80 watts in the CV and even rare so once you get full 80. This Voopoo Too done in the past. He did a good job with the construction of a single turn coil without breakfast double coil construction, but you could not really build strength coil fantasy. Use only one coil around 50-60 ohms mod 0.15 watts barely able to put more than 40 watts of power. So all limited voopoo mods, which was good, but and something I’d like to fix it. This is like a train too alpha, etc. In today with a lot of good affordable mods that do well TC felt it was not up to par because of the limited usually give fault, but said that if just use a simple single coil around that will work well for her.

 

Other usage notes

This model uses a standard 5 clicks to turn on and off. The menu system can be much better because it does not include the right menu. Simply click on the fire three times to switch between default watt TC NI, TI TC, TC SS. I do not see how TCR from now, but you can adjust the temperature mode TCR. the same system as other voopoo mods and SS mode is the default of 1300. Also because of the fire so quickly by clicking on fire three times each sizzle product atomiser is used three times. I wish that manufacturers stop pursuing this fire crap instant or less pretend Innokin where there is no fire after the first press 2 and 3 times. I have a fire mod 12 times to go through anyway seemed out of touch. A downward pressure on the submenu which can pass a watt curve and the temperature curves (5 points each memory) and set the temperature mode and block TCR current mode temperature. Using 4 Click the program or to adjust the power curve in the TC mode. Absolutely easy to use. the better with the PC software in which I can program my turn on the computer and remove the TI mode and Ni forming device, but the software does not currently work for vmate. I’m sure it will be updated at some point when the mod is released but now I do not help at all. On the other hand, and the buttons are not labeled somewhat less strange. It is also a front and back which is less.

 

The Voopoo Drag gradually adjusted to 0.1 watts least 100 watts and 100 watts or more gradually completed. Now you have to adapt quickly. The result is annoying to listen to the watt you. They have to lower the barrier of 0.1 an increase of about 20-25 watts. solid model itself is constructed without rattle at all, and has a good weight. If you feel it is solid, but not heavy. The battery cover is standard magnetic plates. One on each side of the battery and the opposite side mods ignited. It works very well and is very suitable, but not the kind of felt like twice the work for exchange. Not a big problem and it makes sense to keep yourself symmetrically no complaints there. In addition, a magnet on the battery door is reversed so that you can not put the wrong door on the wrong side I thought was cool.

 

paint looks good and not scratched, and I see the door at the bottom outside of the mine are quite normal. There are only two colors so far frame. Silver and tin. I have one silver and is quite bright and fingerprint magnet. He was the color of the door is the black stone and looks like marble black. I love this. Good indicator of the key dislocation and good size. This is on top of the model and easy to fire with thumb or finger pointer. I like the fire of investment in this mod. It works well and never got stuck or anything though as it should. 510-pin gave me any problems and each spray used the great work flawlessly. Mod handle 25 mm flush atomizer. More outgoing. 510 and focused on the scene and secured to the MOD with two screws at the top. the screen has a good size, I would say black and white screen 0.96 inches is nice and bright and easy to see. In addition to the brand itself is nice and simple logo mod giant crazy not to get shot. Voopoo only a small logo on the back. Very nice mod.

 

Pro:

Build quality mod

Simple beauty

The batteries are easy to get without damaging the packaging

12 colors

power mode performance

Watt accurately assess

bright screen size suitable

beautiful button fire

Centering pins 510 which atomizers 25 mm

good volt limit exceeding the recommended specifications

Watt fashion curve

symmetrical design

Drawbacks:

old-fashioned navigation system

mod fires every time you click to change the mode

Full adjustment over 100 watts (must make a small full of watts)

Max amplifier is slightly lower compared to most dual battery mods

PC software is not updated to keep using the mod

TC performance is very limited

Mode without TCR?

conclusion

So with all that said, I recommend this mod or not? I do not like or not so hard, but Voopoo PNP slightly toward him. Would not recommend for TC because of limits and many other good options are now, but as a pilot mode is well model that works well and looks good in this price range and feels solid but not heavy built. Worth seeing if you’re in the market for a new mod and do not care about the TC or just use a single round wire construction for TC can always live with the drawbacks I’ve found. I liked this mod for me CER sheet link below as power is only mod.

 

It was Anthony fried Keep only honest, I hope you all can say the same and I’ll catch the next revision.

 

rejection of the products

This product was sent to me Voopoo

 

Disclaimer comments

Due to possible differences QC your experience may be different.

 

critical warning

I made a vaporizer review since late 2016 and has performed over 300 user comments. I like vapers help forum and contribute to the community a great vaporizer. I’m not “off the beaten path” reviewer. I do my best to be complete at any time and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are shown in my opinion.

 

 

You can buy here:voopoo

https://www.vapeciga.com/collections/voopoo

 

Review of Voopoo Coils Drag 2 Mini Kit Vinci RBA Too Software Pnp Pod

The Voopoo Drag 2 Mini Kit is the latest model of the best known and mod Voopoo first manufacturers have long been.

They Mojo earlier this year, which is a model of the internal battery and is pretty good and it was almost a year ago, when released from voopoo way twice and then mod mod 18650 Double 18650 Vmate 200 watts and organized in symmetrical mod style box with centering pin 510. looking around, I saw her online who have a $ 45-55 price range of 55-65 dollars China or the United States. It is available in 12 colors. 2 silver or pewter frames and various color options for each battery door which includes things such as wood, green, black, camouflage, etc.

Manufacturer Specifications: Mod
Size – 89 mm by 47 mm by 30 mm
Weight – 102g
-Amplificador high double 18650 – not included
32 digits GENE.Fan advanced chipset
Watt Output Range: 5-200W
Output voltage range: 0-7.5V
Resistance range – power mode: 0.05-3.0ohms
Resistance range – TC mode: 0.05-1.0ohms
Temperature range: 200 ° -600 ° F / 100 ° -315 ° C
Supports Ni200, titanium, stainless steel Compatibility
setting mode the TCR
POWER mode
zinc alloy-frame construction
OLED intuitive display
I divided battery Bedroom – Located on each side
shoot button – Located in the battery compartment
two control buttons – located at the top of the battery bay 2
overcurrent protection Output
overload protection
discharge protection
Short protection -Circuit
Battery load balancing
MicroUSB port
510 access
Available in silver and tin
Emerald green S-S-red camouflage, S-Cascade, S Red S Black Rock, S Wood, S-Surf blue-green camouflage S
P-emerald green, red Camouflage P, P-Cascade, P Red-Green Black Rock P-P, P-Wood, P-Surf Blue, camouflage
Included in the box:
Box 1 VOOPOO VMATE Mod 200W
User Guide 1
1 USB Cable
1 GEN smart card
1 Warranty Card
Album
album

first impressions and features
When I saw this mod in the ECC and display that looks good. Screen reminds me that as geekvape and shadow nova legend, but in black and white and left with a symmetrical design that I liked centering pin 510. The only part of this design is the key and MOD battery cover .The batteries are on the opposite side of the mod and Voopoo Vinci RBA but you can not make a single battery and not fashion.

The buttons are above the shutter button on one side and more or less on the other side. Very convenient to use in each hand. Overall, we really designed from the beginning.

Watt Performance mode (graphs and spreadsheets in a photo album)
Now let’s get into some of the data. I ran the normal tests. I use a battery test VTC5A Sony. resistance tests carried out at 0.12, 0.16, 0.21 and 0.64 ohms. watts maximum points (200), 150, 100, 75, 50 and 25 was 0.12 ohms for a maximum of 148 watts and 35 amps. For the rest of the test was a bit on the low side 1-6 watts. Suffer a little, but on par with most mods. 0.16, is maximized to 194 watts. The rest was pretty good low 3-5 watts or 25 watts point to test. To test 0.21 to the limit of 196 watts. Again very good but a little on the low side 2-3 watts developed largely with the exception of 25 tests and 50 tests of 1 watt high. To test the limit of the range of 0.64 to 92 watts and 7,679 volts. For the rest of the test fairly high 5.1 watts are common. Volt car shows in this issue of the return mod as most dual battery mods.

Overall, I think the performance of this model is very good.This is only 0.12 ohms wrong establish common for most Voopoo Too Coils in a small resistance struggle.

It is mainly assigned minimum of bits. I am able to get 196 watts maximum, so I guess it must be accurately evaluated 200 watts. 7679 volt limit indicates the absence of an amplification circuit. a list of its senior members to 7.5V volts maximum score is so good too. No limit amp listed in this mod. More it was 35 with coils of 0.12 ohms at the end of the double bottom mod battery to about 40 today. Personally, if I list my mod specifications require 200 watts, 7.5 V and 35A. Good overall score, so Voopoo. mod was not hot when stressed at all, but it gets a little warm when you are stressed to the maximum watts of high temperature protection. I have no problem with him personally, because I like the safety features do not recommend vaping over 150 applications and battery dual mod still higher than 20 A or CDR evaluated by the exchanges. There is no visible flame and the delay in this mode works well watts mod curve. Also get rid of love and modes of great shit and fire mod because you have to be in power is not alpha.

Overview TLDR energy efficiency
the performance was very good mod. Most hit a few less watts. To assess the accuracy watt (196), there is an amplification circuit 35. Low Volt Ampere limit tested in 7679 that exceeds the specifications listed 7.5V. Watt curve works as it should.

temperature performance monitoring
Using wireless mode SS 6 SS316 tried construction. 2 turns simple single coil, two double loop construction only single winding a coil end, and a construction of double coil luxury. At the same voopoo with all mod mods limited to 80 watts in the CV and even unusual once 80. voopoo completed all modifications made in the past. He did a good job with the construction at once, without breakfast double coil construction, but could not really fancy the coil build strength. Use only 50-60 ohm coils around 0.15 watts mod barely able to put more than 40 watts of power. So all limited Voopoo Drag Software, which was good, but and something I’d like to fix it.

It’s like an alpha-train, etc. In these days with many affordable mods both do well TC felt it was not up to the limit due to generally give an error, but said that if only using simple single coil around it will work well for him,

Pro:
quality model building
natural beauty
The batteries are easily obtained without damaging the packaging
12 colors
performance power mode
Watt accurately assess
size suitable light screen
beautiful fire button
510 centering pin atomizers 25 mm
volt limit well beyond the recommended specifications
Watt mode curve
symmetrical design
deficiency:
old navigation system
mod fires each time you click to change mode
Full adjustment of more than 100 watts (must make a small full watt)
Max amplifiers slightly lower than most dual battery mods
The PC software is not updated to continue to use mod
TC performance is very limited
Fashion without TCR?
conclusion
So with all that said, I recommend this mod or not? I do not like or not that difficult, but it pencherai slightly. I do not recommend for TC because of limits and many other options at the moment, but as a good pilot mode model that works well and looks good in this price range and feels solid but not heavy built. To see if you are in the market for a new mod and do not care about the TC or just use a single round wire building forever TCs can live with drawback I found. I liked this mod for me link card RECs below to power only mod.

It was to keep Anthony fried only honest, I hope you can say the same thing and I’ll catch the next revision.

rejection of products

This product was sent to me Voopoo Pnp Pod Kit

Disclaimer comments

Due to possible differences QC your experience may be different.

critical warning

I made a vaporizer review since late 2016 and has performed over 300 user comments. I like vapers help forum and contribute to the community a great vaporizer. I’m not “off the beaten path” reviewer. I do my best to be complete at any time and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are shown in my opinion.

 

 

You can buy here:voopoo coils

https://www.vapeciga.com/collections/voopoo